CVE-2026-6420: Keylime Keylime Has A Hardcoded Attestation Vulnerability
MODERATECVE-2026-6420 is a MODERATE (CVSS 6.3) keylime has a hardcoded attestation vulnerability (CWE-1241: Use of Predictable Algorithm in Random Number Generator) affecting Keylime libraries in the PyPI ecosystem. The issue involves keylime has a hardcoded attestation challenge nonce that allows replay attacks. Remediation is available by upgrading affected packages to version 7.14.2.
CVE-2026-6420 at a Glance
Security Impact
CVSS: 6.3
The security impact metrics below are parsed directly from the CVSS v3.1 vector string (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:L).
How to Fix CVE-2026-6420
To remediate this vulnerability, upgrade all affected Keylime dependencies to a patched release. Both direct and transitive dependencies should be checked, as frameworks or security libraries may pull in vulnerable versions transitively.
pip install keylime>=7.14.2
Run the following command in your project directory to verify that all resolved dependencies use the patched release:
pip show keylime
How to Check if You Are Affected
To determine whether your Python environment is affected by CVE-2026-6420, inspect your installed packages using pip:
pip show keylime
Analyze the terminal output to locate any version of Keylime in your dependency tree. If any resolved version matches the vulnerable ranges listed in the table below (for example, versions earlier than 7.14.2), your application is affected.
Note: The pip show keylime command checks currently installed packages in your active Python environment.
Technical Details
Vulnerability Mechanism & Technical Analysis
This vulnerability is classified under CWE-1241: Use of Predictable Algorithm in Random Number Generator, where the device uses an algorithm that is predictable and generates a pseudo-random number. In Keylime, software state validation or input boundaries are circumvented during processing. Review the official source advisory statement below for specific affected components, classes, and reproduction details.
Source Advisory Statement
CVE-2026-6420 Affected Keylime Versions
1 component(s)| Product / Package | Ecosystem | Affected Versions | Fixed Version |
|---|---|---|---|
|
keylime
|
PyPI |
≥ 7.14.0
< 7.14.2
|
7.14.2
|
References
Frequently Asked Questions
What is CVE-2026-6420?
Which Keylime versions are affected?
What version fixes CVE-2026-6420?
Is keylime affected?
What is the CVSS score of CVE-2026-6420?
What CWE is associated with CVE-2026-6420?
How can I check PyPI dependencies for CVE-2026-6420?
Machine-readable OSV JSON
OSV v1.5 Schema
{
"schema_version" : "1.4.0",
"id" : "GHSA-q8w6-w55c-ccv5",
"modified" : "2026-05-11T14:42:46Z",
"published" : "2026-05-11T14:42:46Z",
"aliases" : [ "CVE-2026-6420" ],
"summary" : "Keylime has a hardcoded attestation challenge nonce that allows replay attacks",
"details" : "## CVE-2026-6420: Hardcoded attestation challenge nonce allows replay attacks\n\n### Impact\n\nThe `CertificationParameters.generate_challenge()` method in the push attestation protocol uses a hardcoded challenge nonce instead of generating a cryptographically random value. This removes the nonce-based replay protection from TPM quote attestation.\n\nAn attacker with root access on a monitored agent node can exploit this by stockpiling valid TPM quotes (using `tpm2_quote` with the known nonce) before compromising the system, then replaying them to evade detection by the verifier. The push attestation timeout (~10s) constrains the generation window, but TPM throughput allows stockpiling ~50-200 quotes, enabling approximately 8-33 minutes of undetected compromise with default settings.\n\nThe attack is limited to a single agent node (AK signature binding prevents cross-agent replay). The pull-mode (legacy) attestation path is not affected.\n\n**Affected versions:** >= 7.14.0, <= 7.14.1\n\n**CVSS:** 6.3 Medium (`CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:L`)\n\n| Metric | Value | Rationale |\n|---|---|---|\n| AV | Local | Exploitation requires local access to the agent machine (stop agent, access TPM, run replacement). The network transmission of quotes to the verifier is normal protocol operation. |\n| AC | Low | Deterministic attack: publicly visible nonce, standard `tpm2-tools`, no race conditions. |\n| PR | High | Root on a legitimate enrolled node is required. The vulnerability does not help gain access -- it only helps evade detection after root is obtained. No value against a machine the attacker already controls. |\n| UI | None | Fully automated after initial setup. |\n| S | Unchanged | AK signature binding confines impact to the single compromised agent. |\n| C | High | Compromised node continues receiving bootstrap keys, payloads, and secrets intended for trusted nodes. |\n| I | High | Verifier cannot distinguish a healthy system from a fully compromised one during the evasion window. |\n| A | Low | Only the compromised agent's revocation and incident response are suppressed; the system as a whole remains operational. |\n\nThe base score does not fully capture the operational severity: Keylime exists to detect machine compromise, so 8-33 minutes of undetected compromise is operationally critical. The fix is a one-line change and should be applied immediately regardless of the base score.\n\n### Patches\n\nThe fix restores the original random nonce generation (one-line change in `keylime/models/verifier/evidence.py`):\n\n```python\n# Before (vulnerable):\ndef generate_challenge(self, bit_length):\n # self.challenge = Nonce.generate(bit_length)\n self.challenge = bytes.fromhex(\"49beed365aac777dae23564f5ad0ec\")\n\n# After (fixed):\ndef generate_challenge(self, bit_length):\n self.challenge = Nonce.generate(bit_length)\n```\n\nUsers should upgrade to the version containing this fix (7.14.2).\n\n### Workarounds\n\nThere is no complete workaround. The following existing mechanisms provide partial mitigation and are already active by default (no configuration needed):\n\n1. **TPM clock monotonicity check** limits each distinct stockpiled quote to a single use, bounding the total evasion time.\n2. **Push attestation timeout** (default 10s) prevents the attacker from going silent and constrains the quote generation window.\n\nReducing `quote_interval` increases the attestation frequency but does not prevent the stockpiling attack.\n\n### References\n\n- CWE-329: Generation of Predictable IV/Nonce (primary -- hardcoded nonce in cryptographic attestation protocol)\n- CWE-547: Use of Hard-Coded, Security-relevant Constants (hardcoded constant left in production code)\n- CWE-294: Authentication Bypass by Capture-replay (consequence -- enables replay attacks)\n- CWE-1241: Use of Predictable Algorithm in Random Number Generator\n- Introducing commit: [`2bf91197`](https://github.com/keylime/keylime/commit/2bf91197) via [PR #1814](https://github.com/keylime/keylime/pull/1814)\n- TCG TPM 2.0 Library Specification, Part 1, Section 18.4 (TPM2_Quote)\n- IETF RATS Architecture (RFC 9334), Section 8 (Freshness)",
"severity" : [ {
"type" : "CVSS_V3",
"score" : "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:L"
} ],
"affected" : [ {
"package" : {
"ecosystem" : "PyPI",
"name" : "keylime"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "7.14.0"
}, {
"fixed" : "7.14.2"
} ]
} ],
"database_specific" : {
"last_known_affected_version_range" : "<= 7.14.1"
}
} ],
"references" : [ {
"type" : "WEB",
"url" : "https://github.com/keylime/keylime/security/advisories/GHSA-q8w6-w55c-ccv5"
}, {
"type" : "ADVISORY",
"url" : "https://nvd.nist.gov/vuln/detail/CVE-2026-6420"
}, {
"type" : "WEB",
"url" : "https://access.redhat.com/security/cve/CVE-2026-6420"
}, {
"type" : "WEB",
"url" : "https://bugzilla.redhat.com/show_bug.cgi?id=2458889"
}, {
"type" : "PACKAGE",
"url" : "https://github.com/keylime/keylime"
} ],
"database_specific" : {
"cwe_ids" : [ "CWE-1241", "CWE-294", "CWE-329", "CWE-547" ],
"severity" : "MODERATE",
"github_reviewed" : true,
"github_reviewed_at" : "2026-05-11T14:42:46Z",
"nvd_published_at" : null
}
}