CVE-2026-59204: Pillow Denial of Service Vulnerability
HIGHCVE-2026-59204 is a HIGH denial of service vulnerability (CWE-789: Memory Allocation with Excessive Size Value) affecting Pillow libraries in the PyPI ecosystem. The issue involves pillow jpeg2000 tiled decode retains a growing scratch buffer and can be used for denial of service. Remediation is available by upgrading affected packages to version 12.3.0.
CVE-2026-59204 at a Glance
How to Fix CVE-2026-59204
To remediate this vulnerability, upgrade all affected Pillow dependencies to a patched release. Both direct and transitive dependencies should be checked, as frameworks or security libraries may pull in vulnerable versions transitively.
pip install pillow>=12.3.0
Run the following command in your project directory to verify that all resolved dependencies use the patched release:
pip show pillow
How to Check if You Are Affected
To determine whether your Python environment is affected by CVE-2026-59204, inspect your installed packages using pip:
pip show pillow
Analyze the terminal output to locate any version of Pillow in your dependency tree. If any resolved version matches the vulnerable ranges listed in the table below (for example, versions earlier than 12.3.0), your application is affected.
Note: The pip show pillow command checks currently installed packages in your active Python environment.
Technical Details
Vulnerability Mechanism & Technical Analysis
This vulnerability is classified under CWE-789: Memory Allocation with Excessive Size Value, where the product allocates memory based on an untrusted, large size value, but it does not ensure that the size is within expected limits, allowing arbitrary amounts of memory to be allocated. In Pillow, software state validation or input boundaries are circumvented during processing. Review the official source advisory statement below for specific affected components, classes, and reproduction details.
Source Advisory Statement
CVE-2026-59204 Affected Pillow Versions
1 component(s)| Product / Package | Ecosystem | Affected Versions | Fixed Version |
|---|---|---|---|
|
pillow
|
PyPI |
≥ 8.2.0
< 12.3.0
|
12.3.0
|
References
Frequently Asked Questions
What is CVE-2026-59204?
Which Pillow versions are affected?
What version fixes CVE-2026-59204?
Is pillow affected?
What CWE is associated with CVE-2026-59204?
How can I check PyPI dependencies for CVE-2026-59204?
Machine-readable OSV JSON
OSV v1.5 Schema
{
"schema_version" : "1.4.0",
"id" : "GHSA-vjc4-5qp5-m44j",
"modified" : "2026-07-20T23:18:33Z",
"published" : "2026-07-20T23:18:32Z",
"aliases" : [ "CVE-2026-59204" ],
"summary" : "Pillow JPEG2000 tiled decode retains a growing scratch buffer and can be used for denial of service",
"details" : "### Summary\n`src/libImaging/Jpeg2KDecode.c:853` accumulates `total_component_width` across every tile in a JPEG2000 image instead of recomputing it per tile. That accumulated value is then used in the `tile_bytes` calculation at `src/libImaging/Jpeg2KDecode.c:868`, which can make the decoder grow `state->buffer` via `realloc` at `src/libImaging/Jpeg2KDecode.c:876` up to roughly one full image's decompressed size even when each tile is small. A crafted tiled JPEG2000 file can therefore force substantially higher transient memory usage and trigger out-of-memory failures during decoding. Based on current evidence, the supported impact is denial of service, not memory corruption.\n\n### Details\n- Location: `src/libImaging/Jpeg2KDecode.c:853`\n- Root cause: `total_component_width` is initialized only once before the tile loop and keeps growing across tiles. It is then used to derive `tile_bytes`, so later tiles are treated as if they had the combined component width of all earlier tiles.\n- Dangerous operation: `tile_bytes` is promoted into `tile_info.data_size`, then `state->buffer` is grown with `realloc` at `src/libImaging/Jpeg2KDecode.c:876`.\n- Reachability: any attacker-controlled JPEG2000 image with many tiles reaches this path during normal `Image.open(...).load()` decoding.\n\n\n### PoC\nThe attached helper script and testcase were used:\n[exercise_j2k_tile_realloc.zip](https://github.com/user-attachments/files/28099912/exercise_j2k_tile_realloc.zip)\n\n\nGenerate the testcase:\n\n```bash\npythonexercise_j2k_tile_realloc.py make poc_3664_rgba_tile1832.jp2 \\\n --size 3664 --tile 1832\n```\n\nExpected geometry from the helper:\n\n- image size: `3664 x 3664`\n- mode: `RGBA`\n- tile size: `1832 x 1832` (`2x2` tiles)\n- `image_bytes=53699584`\n- uncapped RSS observed:\n - vulnerable build: `maxrss_kb=180264`\n - fixed comparison build: `maxrss_kb=138404`\n\nLoad it with the current vulnerable build:\n\n```bash\npython exercise_j2k_tile_realloc.py load poc_3664_rgba_tile1832.jp2\n```\n\nLoad it again under a 160 MB address-space cap:\n\n```bash\npython exercise_j2k_tile_realloc.py load poc_3664_rgba_tile1832.jp2 --limit-mb 160\n```\n\n### Impact\nConservative impact: denial of service through memory exhaustion during JPEG2000 decoding.",
"severity" : [ {
"type" : "CVSS_V4",
"score" : "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N"
} ],
"affected" : [ {
"package" : {
"ecosystem" : "PyPI",
"name" : "pillow"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "8.2.0"
}, {
"fixed" : "12.3.0"
} ]
} ]
} ],
"references" : [ {
"type" : "WEB",
"url" : "https://github.com/python-pillow/Pillow/security/advisories/GHSA-vjc4-5qp5-m44j"
}, {
"type" : "ADVISORY",
"url" : "https://nvd.nist.gov/vuln/detail/CVE-2026-59204"
}, {
"type" : "WEB",
"url" : "https://github.com/python-pillow/Pillow/pull/9704"
}, {
"type" : "WEB",
"url" : "https://github.com/python-pillow/Pillow/commit/13ada41172142f2fd9f0906f615a00ea623a11ca"
}, {
"type" : "PACKAGE",
"url" : "https://github.com/python-pillow/Pillow"
}, {
"type" : "WEB",
"url" : "https://github.com/python-pillow/Pillow/releases/tag/12.3.0"
} ],
"database_specific" : {
"cwe_ids" : [ "CWE-770", "CWE-789" ],
"severity" : "HIGH",
"github_reviewed" : true,
"github_reviewed_at" : "2026-07-20T23:18:32Z",
"nvd_published_at" : "2026-07-14T16:17:02Z"
}
}