CVE-2026-106442: Hydra core Hydra Instantiate Target Blacklist Bypasses Vulnerability
HIGHCVE-2026-106442 is a HIGH (CVSS 7.8) hydra instantiate target blacklist bypasses vulnerability (CWE-184: Incomplete List of Disallowed Inputs) affecting Hydra core libraries in the PyPI ecosystem. The issue involves hydra instantiate target blacklist bypasses permit code execution. Remediation is available by upgrading affected packages to version 1.3.6, 1.4.0.dev9.
CVE-2026-106442 at a Glance
Security Impact
CVSS: 7.8
The security impact metrics below are parsed directly from the CVSS v3.1 vector string (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H).
How to Fix CVE-2026-106442
To remediate this vulnerability, upgrade all affected Hydra core dependencies to a patched release. Both direct and transitive dependencies should be checked, as frameworks or security libraries may pull in vulnerable versions transitively.
pip install hydra-core>=1.3.6
pip install hydra-core>=1.4.0.dev9
Run the following command in your project directory to verify that all resolved dependencies use the patched release:
pip show hydra-core
How to Check if You Are Affected
To determine whether your Python environment is affected by CVE-2026-106442, inspect your installed packages using pip:
pip show hydra-core
Analyze the terminal output to locate any version of Hydra core in your dependency tree. If any resolved version matches the vulnerable ranges listed in the table below (for example, versions earlier than 1.3.6), your application is affected.
Note: The pip show hydra-core command checks currently installed packages in your active Python environment.
Technical Details
Vulnerability Mechanism & Technical Analysis
This vulnerability is classified under CWE-184: Incomplete List of Disallowed Inputs, where the product implements a protection mechanism that relies on a list of inputs (or properties of inputs) that are not allowed by policy or otherwise require other action to neutralize before additional processing takes place, but the list is incomplete. In Hydra core, software state validation or input boundaries are circumvented during processing. Review the official source advisory statement below for specific affected components, classes, and reproduction details.
Source Advisory Statement
CVE-2026-106442 Affected Hydra core Versions
2 component(s)| Product / Package | Ecosystem | Affected Versions | Fixed Version |
|---|---|---|---|
|
hydra-core
|
PyPI |
≥ 1.3.4
< 1.3.6
|
1.3.6
|
|
hydra-core
|
PyPI |
≥ 1.4.0.dev0
< 1.4.0.dev9
|
1.4.0.dev9
|
References
Frequently Asked Questions
What is CVE-2026-106442?
Which Hydra core versions are affected?
What version fixes CVE-2026-106442?
Is hydra-core affected?
What is the CVSS score of CVE-2026-106442?
What CWE is associated with CVE-2026-106442?
How can I check PyPI dependencies for CVE-2026-106442?
Machine-readable OSV JSON
OSV v1.5 Schema
{
"schema_version" : "1.4.0",
"id" : "GHSA-rqx7-p7vv-w7hr",
"modified" : "2026-10-07T18:03:49Z",
"published" : "2026-10-07T18:03:49Z",
"aliases" : [ "CVE-2026-106442" ],
"summary" : "Hydra instantiate target blacklist bypasses permit code execution",
"details" : "## Summary\n\nHydra's `instantiate()` API resolves and invokes Python callables named by the `_target_` field in configuration. The target blacklist introduced for CVE-2026-68508 was incomplete.\n\nRepresentative bypasses included execution wrappers such as `timeit.timeit`, executable deserialization through `pickle.loads`, and generic dispatch or wrapper targets that obscured the effective callable. Target aliases, callable-returning helpers, and deferred dispatch could similarly bypass name-based checks.\n\nAn attacker who can cause an application to instantiate an untrusted Hydra configuration can use these gaps to execute code with the application's privileges.\n\n## Fix\n\nHydra 1.3.6 expands and hardens the blacklist used by the 1.3 compatibility line. It blocks the reported execution and deserialization surfaces, checks canonical callable identities and aliases, mediates callable results, and blocks generic dispatch and wrapper targets that bypass immediate target checks.\n\nThe Hydra 1.3 blacklist is a best-effort, defense-in-depth measure. It is not a complete security boundary and does not make untrusted configuration safe to instantiate.\n\nHydra 1.4.0.dev9 applies the same hardening and introduces the execution whitelist as the recommended primary security boundary. When a whitelist is supplied, targets are rejected unless trusted Python code authorizes them. If no whitelist is supplied, Hydra preserves legacy behavior with a deprecation warning and the blacklist as a best-effort compatibility fallback. Targets that permit configuration to select or supply executable behavior remain non-whitelistable.\n\n## Remediation\n\nUpgrade to Hydra 1.3.6, or to Hydra 1.4.0.dev9 or later when testing the 1.4 prerelease line.\n\nOn Hydra 1.3, do not instantiate configuration from untrusted sources. On Hydra 1.4 and later, constrain untrusted configuration with a narrow execution whitelist supplied by trusted Python code.\n\nFor Hydra 1.4 execution-whitelist configuration, see: https://hydra.cc/docs/advanced/execution_whitelist/",
"severity" : [ {
"type" : "CVSS_V3",
"score" : "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H"
} ],
"affected" : [ {
"package" : {
"ecosystem" : "PyPI",
"name" : "hydra-core"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "1.3.4"
}, {
"fixed" : "1.3.6"
} ]
} ]
}, {
"package" : {
"ecosystem" : "PyPI",
"name" : "hydra-core"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "1.4.0.dev0"
}, {
"fixed" : "1.4.0.dev9"
} ]
} ]
} ],
"references" : [ {
"type" : "WEB",
"url" : "https://github.com/hydra-ecosystem/hydra/security/advisories/GHSA-rqx7-p7vv-w7hr"
}, {
"type" : "ADVISORY",
"url" : "https://nvd.nist.gov/vuln/detail/CVE-2026-106442"
}, {
"type" : "WEB",
"url" : "https://github.com/hydra-ecosystem/hydra/pull/3412"
}, {
"type" : "WEB",
"url" : "https://github.com/hydra-ecosystem/hydra/pull/3413"
}, {
"type" : "WEB",
"url" : "https://github.com/hydra-ecosystem/hydra/commit/2c82bbb3f39603b336cb852461739fdf7a38798a"
}, {
"type" : "WEB",
"url" : "https://github.com/hydra-ecosystem/hydra/commit/f462811117b5ecfd2ed652ed52d6b4e3771bd943"
}, {
"type" : "PACKAGE",
"url" : "https://github.com/hydra-ecosystem/hydra"
}, {
"type" : "WEB",
"url" : "https://github.com/hydra-ecosystem/hydra/releases/tag/v1.3.6"
} ],
"database_specific" : {
"cwe_ids" : [ "CWE-184" ],
"severity" : "HIGH",
"github_reviewed" : true,
"github_reviewed_at" : "2026-10-07T18:03:49Z",
"nvd_published_at" : "2026-10-06T19:18:13Z"
}
}