CVE-2026-31469: Software Security Vulnerability Vulnerability
HIGHCVE-2026-31469 is a HIGH (CVSS 7.8) security vulnerability vulnerability (CWE-416: Use After Free) affecting Software libraries in the Maven ecosystem. The weakness occurs when the product reuses or references memory after it has been freed. at some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.. Remediation is available in the latest vendor maintenance releases.
CVE-2026-31469 at a Glance
Security Impact
CVSS: 7.8
The security impact metrics below are parsed directly from the CVSS v3.1 vector string (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).
How to Fix CVE-2026-31469
To remediate this vulnerability, upgrade all affected Software dependencies to a patched release. Both direct and transitive dependencies should be checked, as frameworks or security libraries may pull in vulnerable versions transitively.
Run the following command in your project directory to verify that all resolved dependencies use the patched release:
mvn dependency:treeHow to Check if You Are Affected
To determine whether your Java application is affected by CVE-2026-31469, inspect your build dependencies using the Maven Dependency Plugin:
mvn dependency:treeAnalyze the terminal output to locate any version of Software in your dependency tree. If any resolved version matches the vulnerable ranges listed in the table below (for example, versions earlier than the patched release), your application is affected.
Note: The mvn dependency:tree command inspects the resolved dependency graph declared in your project's POM files; it does not perform automated security scanning or inspect runtime dynamic classpaths. Always verify runtime container classpaths and shaded JARs.
Technical Details
Vulnerability Mechanism & Technical Analysis
This vulnerability is classified under CWE-416: Use After Free, where the product reuses or references memory after it has been freed. at some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer. In Software, software state validation or input boundaries are circumvented during processing. Review the official source advisory statement below for specific affected components, classes, and reproduction details.
Source Advisory Statement
References
Frequently Asked Questions
What is CVE-2026-31469?
Which Software versions are affected?
What version fixes CVE-2026-31469?
What is the CVSS score of CVE-2026-31469?
What CWE is associated with CVE-2026-31469?
How can I check Maven dependencies for CVE-2026-31469?
Machine-readable OSV JSON
OSV v1.5 Schema
{
"schema_version" : "1.4.0",
"id" : "GHSA-vggv-f293-vmjw",
"modified" : "2026-10-15T03:35:37Z",
"published" : "2026-04-22T15:31:42Z",
"aliases" : [ "CVE-2026-31469" ],
"details" : "In the Linux kernel, the following vulnerability has been resolved:\n\nvirtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false\n\nA UAF issue occurs when the virtio_net driver is configured with napi_tx=N\nand the device's IFF_XMIT_DST_RELEASE flag is cleared\n(e.g., during the configuration of tc route filter rules).\n\nWhen IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack\nexpects the driver to hold the reference to skb->dst until the packet\nis fully transmitted and freed. In virtio_net with napi_tx=N,\nskbs may remain in the virtio transmit ring for an extended period.\n\nIf the network namespace is destroyed while these skbs are still pending,\nthe corresponding dst_ops structure has freed. When a subsequent packet\nis transmitted, free_old_xmit() is triggered to clean up old skbs.\nIt then calls dst_release() on the skb associated with the stale dst_entry.\nSince the dst_ops (referenced by the dst_entry) has already been freed,\na UAF kernel paging request occurs.\n\nfix it by adds skb_dst_drop(skb) in start_xmit to explicitly release\nthe dst reference before the skb is queued in virtio_net.\n\nCall Trace:\n Unable to handle kernel paging request at virtual address ffff80007e150000\n CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT\n ...\n percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)\n dst_release+0xe0/0x110 net/core/dst.c:177\n skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177\n sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255\n dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469\n napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527\n __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]\n free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]\n start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]\n ...\n\nReproduction Steps:\nNETDEV=\"enp3s0\"\n\nconfig_qdisc_route_filter() {\n tc qdisc del dev $NETDEV root\n tc qdisc add dev $NETDEV root handle 1: prio\n tc filter add dev $NETDEV parent 1:0 \\\n\tprotocol ip prio 100 route to 100 flowid 1:1\n ip route add 192.168.1.100/32 dev $NETDEV realm 100\n}\n\ntest_ns() {\n ip netns add testns\n ip link set $NETDEV netns testns\n ip netns exec testns ifconfig $NETDEV 10.0.32.46/24\n ip netns exec testns ping -c 1 10.0.32.1\n ip netns del testns\n}\n\nconfig_qdisc_route_filter\n\ntest_ns\nsleep 2\ntest_ns",
"severity" : [ {
"type" : "CVSS_V3",
"score" : "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
} ],
"affected" : [ ],
"references" : [ {
"type" : "ADVISORY",
"url" : "https://nvd.nist.gov/vuln/detail/CVE-2026-31469"
}, {
"type" : "WEB",
"url" : "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
}, {
"type" : "WEB",
"url" : "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
}, {
"type" : "WEB",
"url" : "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/63d45077b97bb0e0fe0c75931acbbca7a47af141"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/8a4790850e710fd6771e4d2112168ed1dd6c0e54"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/9a18629f2525781f0f3dda7be72b204e4cf77d08"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/ba8bda9a0896746053aa97ac6c3e08168729172c"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/be0e63f3b97bbaf453c542e8a15ba2a536e2ac01"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/c1ec36cb3768574b916f20d2d7415fd14fa1bf12"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/f04733c4dc40c43899c3d1c97afbae5831a3770f"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/fedd2e1630cac920844997227ccbe7b26a76375a"
} ],
"database_specific" : {
"cwe_ids" : [ "CWE-416" ],
"severity" : "HIGH",
"github_reviewed" : false,
"github_reviewed_at" : null,
"nvd_published_at" : "2026-04-22T14:16:43Z"
}
}