CVE-2025-39691: Software Security Vulnerability Vulnerability
HIGHCVE-2025-39691 is a HIGH (CVSS 7.8) security vulnerability vulnerability (CWE-416: Use After Free) affecting Software libraries in the Maven ecosystem. The weakness occurs when the product reuses or references memory after it has been freed. at some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer.. Remediation is available in the latest vendor maintenance releases.
CVE-2025-39691 at a Glance
Security Impact
CVSS: 7.8
The security impact metrics below are parsed directly from the CVSS v3.1 vector string (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).
How to Fix CVE-2025-39691
To remediate this vulnerability, upgrade all affected Software dependencies to a patched release. Both direct and transitive dependencies should be checked, as frameworks or security libraries may pull in vulnerable versions transitively.
Run the following command in your project directory to verify that all resolved dependencies use the patched release:
mvn dependency:tree
How to Check if You Are Affected
To determine whether your Java application is affected by CVE-2025-39691, inspect your build dependencies using the Maven Dependency Plugin:
mvn dependency:tree
Analyze the terminal output to locate any version of Software in your dependency tree. If any resolved version matches the vulnerable ranges listed in the table below (for example, versions earlier than the patched release), your application is affected.
Note: The mvn dependency:tree command inspects the resolved dependency graph declared in your project's POM files; it does not perform automated security scanning or inspect runtime dynamic classpaths. Always verify runtime container classpaths and shaded JARs.
Technical Details
Vulnerability Mechanism & Technical Analysis
This vulnerability is classified under CWE-416: Use After Free, where the product reuses or references memory after it has been freed. at some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer. In Software, software state validation or input boundaries are circumvented during processing. Review the official source advisory statement below for specific affected components, classes, and reproduction details.
Source Advisory Statement
References
Frequently Asked Questions
What is CVE-2025-39691?
Which Software versions are affected?
What version fixes CVE-2025-39691?
What is the CVSS score of CVE-2025-39691?
What CWE is associated with CVE-2025-39691?
How can I check Maven dependencies for CVE-2025-39691?
Machine-readable OSV JSON
OSV v1.5 Schema
{
"schema_version" : "1.4.0",
"id" : "GHSA-6684-j5cx-q9qw",
"modified" : "2026-10-15T03:34:57Z",
"published" : "2025-09-05T18:31:26Z",
"aliases" : [ "CVE-2025-39691" ],
"details" : "In the Linux kernel, the following vulnerability has been resolved:\n\nfs/buffer: fix use-after-free when call bh_read() helper\n\nThere's issue as follows:\nBUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110\nRead of size 8 at addr ffffc9000168f7f8 by task swapper/3/0\nCPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64\nHardware name: QEMU Standard PC (i440FX + PIIX, 1996)\nCall Trace:\n <IRQ>\n dump_stack_lvl+0x55/0x70\n print_address_description.constprop.0+0x2c/0x390\n print_report+0xb4/0x270\n kasan_report+0xb8/0xf0\n end_buffer_read_sync+0xe3/0x110\n end_bio_bh_io_sync+0x56/0x80\n blk_update_request+0x30a/0x720\n scsi_end_request+0x51/0x2b0\n scsi_io_completion+0xe3/0x480\n ? scsi_device_unbusy+0x11e/0x160\n blk_complete_reqs+0x7b/0x90\n handle_softirqs+0xef/0x370\n irq_exit_rcu+0xa5/0xd0\n sysvec_apic_timer_interrupt+0x6e/0x90\n </IRQ>\n\n Above issue happens when do ntfs3 filesystem mount, issue may happens\n as follows:\n mount IRQ\nntfs_fill_super\n read_cache_page\n do_read_cache_folio\n filemap_read_folio\n mpage_read_folio\n\t do_mpage_readpage\n\t ntfs_get_block_vbo\n\t bh_read\n\t submit_bh\n\t wait_on_buffer(bh);\n\t blk_complete_reqs\n\t\t\t\t scsi_io_completion\n\t\t\t\t scsi_end_request\n\t\t\t\t blk_update_request\n\t\t\t\t end_bio_bh_io_sync\n\t\t\t\t\t end_buffer_read_sync\n\t\t\t\t\t __end_buffer_read_notouch\n\t\t\t\t\t unlock_buffer\n\n wait_on_buffer(bh);--> return will return to caller\n\n\t\t\t\t\t put_bh\n\t\t\t\t\t --> trigger stack-out-of-bounds\nIn the mpage_read_folio() function, the stack variable 'map_bh' is\npassed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and\nwait_on_buffer() returns to continue processing, the stack variable\nis likely to be reclaimed. Consequently, during the end_buffer_read_sync()\nprocess, calling put_bh() may result in stack overrun.\n\nIf the bh is not allocated on the stack, it belongs to a folio. Freeing\na buffer head which belongs to a folio is done by drop_buffers() which\nwill fail to free buffers which are still locked. So it is safe to call\nput_bh() before __end_buffer_read_notouch().",
"severity" : [ {
"type" : "CVSS_V3",
"score" : "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
} ],
"affected" : [ ],
"references" : [ {
"type" : "ADVISORY",
"url" : "https://nvd.nist.gov/vuln/detail/CVE-2025-39691"
}, {
"type" : "WEB",
"url" : "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
}, {
"type" : "WEB",
"url" : "https://cert-portal.siemens.com/productcert/html/ssa-032379.html"
}, {
"type" : "WEB",
"url" : "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/03b40bf5d0389ca23ae6857ee25789f0e0b47ce8"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/042cf48ecf67f72c8b3846c7fac678f472712ff3"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/3169edb8945c295cf89120fc6b2c35cfe3ad4c9e"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/70a09115da586bf662c3bae9c0c4a1b99251fad9"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/7375f22495e7cd1c5b3b5af9dcc4f6dffe34ce49"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/90b5193edb323fefbee0e4e5bc39ed89dcc37719"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/c58c6b532b7b69537cfd9ef701c7e37cdcf79dc4"
}, {
"type" : "WEB",
"url" : "https://git.kernel.org/stable/c/c5aa6ba1127307ab5dc3773eaf40d73a3423841f"
}, {
"type" : "WEB",
"url" : "https://lists.debian.org/debian-lts-announce/2025/10/msg00007.html"
}, {
"type" : "WEB",
"url" : "https://lists.debian.org/debian-lts-announce/2025/10/msg00008.html"
} ],
"database_specific" : {
"cwe_ids" : [ "CWE-416" ],
"severity" : "HIGH",
"github_reviewed" : false,
"github_reviewed_at" : null,
"nvd_published_at" : "2025-09-05T18:15:45Z"
}
}