GHSA-47qg-q58v-7vrp: Amundsen frontend UNEDITABLE_SCHEMAS And UNEDITABLE_TABLE_DESCRIPTION_MATCH_RULES Not Respected Vulnerability
LOWGHSA-47qg-q58v-7vrp is a LOW uneditable_schemas and uneditable_table_description_match_rules not respected vulnerability (CWE-602: Client-Side Enforcement of Server-Side Security) affecting Amundsen frontend libraries in the PyPI ecosystem. The issue involves uneditable_schemas and uneditable_table_description_match_rules not respected by frontend service backend. Remediation is available by upgrading affected packages to version 3.1.0.
GHSA-47qg-q58v-7vrp at a Glance
How to Fix GHSA-47qg-q58v-7vrp
To remediate this vulnerability, upgrade all affected Amundsen frontend dependencies to a patched release. Both direct and transitive dependencies should be checked, as frameworks or security libraries may pull in vulnerable versions transitively.
pip install amundsen-frontend>=3.1.0
pip install amundsen-frontend>=3.1.0
Run the following command in your project directory to verify that all resolved dependencies use the patched release:
pip show amundsen-frontend
How to Check if You Are Affected
To determine whether your Python environment is affected by GHSA-47qg-q58v-7vrp, inspect your installed packages using pip:
pip show amundsen-frontend
Analyze the terminal output to locate any version of Amundsen frontend in your dependency tree. If any resolved version matches the vulnerable ranges listed in the table below (for example, versions earlier than 3.1.0), your application is affected.
Note: The pip show amundsen-frontend command checks currently installed packages in your active Python environment.
Technical Details
Vulnerability Mechanism & Technical Analysis
This vulnerability is classified under CWE-602: Client-Side Enforcement of Server-Side Security, where the product is composed of a server that relies on the client to implement a mechanism that is intended to protect the server. In Amundsen frontend, software state validation or input boundaries are circumvented during processing. Review the official source advisory statement below for specific affected components, classes, and reproduction details.
Source Advisory Statement
GHSA-47qg-q58v-7vrp Affected Amundsen frontend Versions
2 component(s)| Product / Package | Ecosystem | Affected Versions | Fixed Version |
|---|---|---|---|
|
amundsen-frontend
|
PyPI |
≥ 2.3.0
< 3.1.0
All 1 versions
2.3.0
|
3.1.0
|
|
amundsen-frontend
|
PyPI |
≥ 3.0.0
< 3.1.0
All 1 versions
3.0.0
|
3.1.0
|
References
Frequently Asked Questions
What is GHSA-47qg-q58v-7vrp?
Which Amundsen frontend versions are affected?
What version fixes GHSA-47qg-q58v-7vrp?
Is amundsen-frontend affected?
What CWE is associated with GHSA-47qg-q58v-7vrp?
How can I check PyPI dependencies for GHSA-47qg-q58v-7vrp?
Machine-readable OSV JSON
OSV v1.5 Schema
{
"schema_version" : "1.4.0",
"id" : "GHSA-47qg-q58v-7vrp",
"modified" : "2020-12-02T02:18:42Z",
"published" : "2020-12-02T18:28:10Z",
"aliases" : [ ],
"summary" : "UNEDITABLE_SCHEMAS and UNEDITABLE_TABLE_DESCRIPTION_MATCH_RULES not respected by frontend service backend",
"details" : "### Impact\nAny install that has `UNEDITABLE_SCHEMAS` and/or `UNEDITABLE_TABLE_DESCRIPTION_MATCH_RULES` set in the front-end, is being impacted. The value of these properties is ignored if set, allowing any user to modify table and column descriptions, even though the properties imply they shouldn't be.\n\n### Patches\nThere is an attached PR that applies this restriction on the back-end.\n\n### Workarounds\nN/A\n\n### References\nN/A\n\n### For more information\nIf you have any questions or comments about this advisory:\n* Email us at [amundsen-security@lists.lfaidata.foundation](mailto:amundsen-security@lists.lfaidata.foundation)\n\n### More details\nSummary: I believe that UNEDITABLE_SCHEMAS and\nUNEDITABLE_TABLE_DESCRIPTION_MATCH_RULES are only being applied on the\nfront-end, not on the frontend service back-end, allowing any user to\nmodify table and column descriptions even if this configuration parameter\nis set.\n\nRepro steps:\n\n1. docker-compose -f docker-amundsen.yml up neo4j elasticsearch\namundsensearch amundsenmetadata\n2. python example/scripts/sample_data_loader.py\n3. FRONTEND_SVC_CONFIG_MODULE_CLASS=amundsen_application.config.TestConfig\nPYTHONPATH=. python3 amundsen_application/wsgi.py\n4. Attempt a modification to a table description:\n\ncurl '<http://localhost:5000/api/metadata/v0/put_table_description>' \\\\\\\\\n-X 'PUT' \\\\\\\\\n-H 'Content-Type: application/json;charset=UTF-8' \\\\\\\\\n--data-binary '{\"description\":\"2t test table\",\"key\":\"hive://gold.test_schema/test_table1\",\"source\":\"user\"}'\n{\"msg\":\"Success\"}\n\n\n\n5. This correctly succeeds, which can be validated by GETing the info:\n\ncurl '<http://localhost:5000/api/metadata/v0/get_table_description?key=hive://gold.test_schema/test_table1>'\n{\"description\":\"1st test table\",\"msg\":\"Success\"}\n\n\nAt this point, modify TestConfig inside config.py to add this line: UNEDITABLE_SCHEMAS\n= set(['test_schema'])\n\nYou can now re-run step 4, and step 5 with different data, and confirm\nthat the modification has persisted. If you build and run the UI, you can\nsee that on the page\n<http://localhost:5000/table_detail/gold/hive/test_schema/test_table1>\nhttp://localhost:5000/table_detail/gold/hive/test_schema/test_table1, the\ninline editor is correctly disabled.\n\nLooking at\namundsenfrontendlibrary/amundsen_application/api/metadata/v0.py:268\nput_table_description, you can see there's no reference to\nUNEDITABLE_SCHEMAS or UNEDITABLE_TABLE_DESCRIPTION_MATCH_RULES.\n\nThe only place I can find these referenced is in\namundsenfrontendlibrary/amundsen_application/api/utils/metadata_utils.py:marshall_table_full,\nwhich would explain why the UI is correctly respecting this setting.\n\nIf this is correct, put_column_description would also be similarly\naffected.\n\nI believe the correct fix for all of these methods is to load the table,\nrun it through marshall_dashboard_partial to fully evaluate what's\neditable or not (to reuse the same code path for FE and back-end), and\nreject the response if it's not editable. I'll implement a fix along these\nlines once someone confirms this.\n\nHistory: This functionality was introduced in\n<https://github.com/amundsen-io/amundsenfrontendlibrary/pull/497/files>\nhttps://github.com/amundsen-io/amundsenfrontendlibrary/pull/497 on July\n9, corresponding to the 2.3.0 release of amundsenfrontend. That release was\nintroduced into the main repo dockerfile on October 28 in\n<https://github.com/amundsen-io/amundsen/pull/785>\nhttps://github.com/amundsen-io/amundsen/pull/785",
"severity" : [ ],
"affected" : [ {
"package" : {
"ecosystem" : "PyPI",
"name" : "amundsen-frontend"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "2.3.0"
}, {
"fixed" : "3.1.0"
} ]
} ],
"versions" : [ "2.3.0" ]
}, {
"package" : {
"ecosystem" : "PyPI",
"name" : "amundsen-frontend"
},
"ranges" : [ {
"type" : "ECOSYSTEM",
"events" : [ {
"introduced" : "3.0.0"
}, {
"fixed" : "3.1.0"
} ]
} ],
"versions" : [ "3.0.0" ]
} ],
"references" : [ {
"type" : "WEB",
"url" : "https://github.com/amundsen-io/amundsenfrontendlibrary/security/advisories/GHSA-47qg-q58v-7vrp"
}, {
"type" : "WEB",
"url" : "https://github.com/amundsen-io/amundsenfrontendlibrary/commit/0b47694ea74cbbef34e03eb45f29643b16a1332a"
} ],
"database_specific" : {
"cwe_ids" : [ "CWE-602" ],
"severity" : "LOW",
"github_reviewed" : true,
"github_reviewed_at" : "2020-12-02T02:18:42Z",
"nvd_published_at" : null
}
}